MODEL
	60" Shibaura	72" Shibaura
ENGINE
MANUFACTURER	Shibaura (Tier 4)	Shibaura (Tier 4)
HP (PER SAE J 1995.)	25 HP	25 HP
DISPLACEMENT	1131cc	1131cc
COOLING	Liquid Cooler, Direct Drive, Mechanical Cooling Fan	Liquid Cooler, Direct Drive, Mechanical Cooling Fan
AIR CLEANER	Heavy-Duty Canister	Heavy-Duty Canister
ENGINE WARRANTY	3 Year	3 Year
DRIVE SYSTEM
TYPE	Dual Hydrostatic	Dual Hydrostatic
PUMPS	Hydro-Gear 21cc Tandem	Hydro-Gear 21cc Tandem
WHEEL MOTORS	Parker TG0335	Parker TG0335
HYDRAULIC LINES	Stainless Steel Parker w/ Seal Loc Technology	Stainless Steel Parker w/ Seal Loc Technology
HYDRAULIC COOLING	Oil Cooler w/ 8" Fan	Oil Cooler w/ 8" Fan
RESERVOIR CAPACITY	1.3 gal.	1.3 gal.
TRANSMISSION	n/a	n/a
SPEED	12 mph	12 mph
PARKING BRAKES	Patented Automatic	Patented Automatic
DECKS
CUTTING WIDTH	60"	72"
CUTTING HEIGHTS	1" - 5.5"	1" - 5.5"
DECK LIFT	Foot Operated	Foot Operated
DEPTH	5.5"	5.5"
BLADES	3	3
BLADE LENGTH	20.5" x 3.0" x .203"	24.5" x 3.0" x .250"
BLADE TIP SPEED	18,260 fpm	18,890 fpm
SPINDLES	Ductile Cast Iron w/ Steel Shafts and Sealed Ball Bearings	Ductile Cast Iron w/ Steel Shafts and Sealed Ball Bearings
DECK BELTS	1	1
DRIVE	Electric PTO Clutch	Electric PTO Clutch
CONSTRUCTION	11ga. + 11ga. + 7ga. Welded Steel	11ga. + 11ga. + 7ga. Welded Steel
SPINDLE MOUNTS	Reinforced 11ga. Doubler + 7ga. Tripler, Steel	Reinforced 11ga. Doubler + 7ga. Tripler, Steel
IMPACT/TRIM AREAS	1.5" x .375" Steel Bar Protector	1.5" x .375" Steel Bar Protector
CONSTRUCTION
FRAME	1.5" x 3.0" x .187" Steel	1.5" x 3.0" x .187" Steel
FRONT AXLE	n/a	n/a
FRONT CASTER WHEELS	Mounted w/ Sealed Ball Bearings	Mounted w/ Sealed Ball Bearings
FRONT CASTER FORKS	Fabricated 1/2" Steel	Fabricated 1/2" Steel
GENERAL
SEAT	Grammer Suspension Seat, Isolator Platform	Grammer Suspension Seat, Isolator Platform
FUEL CAPACITY	14.4 gal.	14.4 gal.
CUP HOLDER	Yes	Yes
FRONT TIRE	13" x 6.5"	13" x 6.5"
DRIVE TIRE	24" x 12"	24" x 12"
PRODUCTIVITY
ACRES PER HOUR	5.57 aph	6.68 aph
DIMENSIONS
WEIGHT	1695 lbs.	1760 lbs.
HEIGHT	n/a	n/a
HEIGHT W/ ROPS UP	69"	69"
HEIGHT W/ ROPS FOLDED	51"	51"
LENGTH	86.8"	90.4"
WIDTH W/ CHUTE UP	66"	78"
TIRE WIDTH	56"	56"
DIMENSIONS W/ CATCHER
CATCHER TYPE	n/a	n/a

MULCH KIT - Recycle clippings back into the soil and reclaim nutrients for your lawn.
FLEX FORKS - Shock absorbing front caster forks improve operator comfort and provide a more even cut, especially over uneven terrain and at higher speeds.
BEACON KIT - Flashing beacon lights are sometimes required when mowing in high traffic or to make mowing crews more visible. Mounts on the ROPS.
LIGHT KIT - Extend your productivity into the late hours with our optional light kit. Kit contains two high-quality 12-volt lights with a switch that mounts in the instrument panel.
HITCH KIT - Bolt-on hitch with 7/8" hole. Will accept any standard ball.
ELECTRIC DECK LIFT - Raise and lower the deck with the flip of a switch. This electric lift kit consists of simple bolt on hardware and switch installation.
STRIPE KIT - Helps provide a professional manicured finish to your lawn.
SAND KIT - A deck kit that helps withstand the heavy use in sandy conditions.
STEERING LEVER EXTENSION KIT - Allows height adjustment of steering levers to make your mowing experience as comfortable as possible.
SINGLE ANTI-SCALP WHEEL - Additional kit for increased deck scalping protection. Two height settings. Can be used in conjunction with the dual anti-scalp kit.
DUAL ANTI-SCALP WHEELS - Additional kit for increased deck scalping protection. Fixed position. Can be used in conjunction with the single anti-scalp wheel kit.
SEMI-PNEUMATIC FRONT TIRES - Flat-free front tire option.
FLASHER KIT - Flasher kit for increased visibility and safety.